Ports to connect to on The Attendant: BUS1 – BUS4
Ports to connect to on The Attendant Mini: BUS1 – BUS2
Your ClearSalt system should ship with a weatherized connector plug that you will use to terminate the communication wiring from the Attendant.
Some Moov salt chlorinators from earlier shipments may be missing the RS485 cable needed to connect to The Attendant. If yours is missing, please contact Moov for a replacement.
When programming the ClearSalt in The Attendant, the default address is 8.
Wiring Connections
| Wire Color / ClearSalt RS485 Port Pin | Bus Connector |
|---|---|
| Green (Pin 1) | D+ |
| Brown (Pin 2) | D- |
Please see the following diagram for details:
