Poolside Tech conveniently allows multiple Attendant controllers to be wired together to allow them to work as one unit.
This allows you the freedom to add more devices – like pumps, actuators, and lights – to a system that might’ve not had enough relays or other ports to connect them all.
However, not all devices types can be physically wired and controlled by what we call a “secondary” Attendant device.
| Device Type | Supported on Secondary? | Supported on Secondary Module? |
|---|---|---|
| Autofill Solenoids | No | Yes |
| Blowers | Yes | Yes |
| Chemical Pumps | Yes | Yes |
| Chillers | No | Yes |
| Chlorine Sensor | No | Yes |
| Cleaners | No | Yes |
| Dissolved Oxygen Sensors | No | Yes |
| Fill Switches | No | Yes |
| Fire Devices | Yes | Yes |
| Flow Meters | No | No |
| Flow Relays | No | Yes |
| Flow Switches | Yes | Yes |
| Generic On/Off Devices | Yes | Yes |
| Heat Pumps | No | Yes |
| Heaters | Yes | Yes |
| Light Drivers (Jandy and Hayward Only) | Yes | Yes |
| Lights (DMX) | Yes | Yes |
| Lights (Non-DMX) | Yes | Yes |
| ORP Probes | Yes | No |
| Ozonators | No | Yes |
| pH Probes | Yes | No |
| Pool Cover Switches | No | Yes |
| Pressure Sensors (RS-485) | Yes | Yes |
| Pressure Sensors (4-20mA) | Yes | No |
| Salt Cells | Yes | Yes |
| Simple Spa Side Remotes | Yes | Yes |
| Smart Spa Side Remotes | No | Yes |
| Thermistors | Yes | Yes |
| Three-Way Actuators | Yes | Yes |
| Two-Way Actuators | Yes | Yes |
| UV Sanitizers | No | Yes |
| Water Level Sensors | Yes | Yes |
| Water Pumps | Yes | Yes |
* Requires installation of a Chemistry interface board on the Secondary Attendant.
** While DMX Lights are supported and can be controlled when wired to a secondary Attendant, these will NOT be available for use when Syncing to Spotify.
✝ Please note that Jandy-style 3-prong water level sensors require 2 thermistor ports.